|
| ||||
|
|
|
|
|
|
|
| ||||
 | |
|---|---|
| SUCTION ROLL | |
| Since establishing an enterprise, number of productions exceeds 1500. It is used widely in Korea & Taiwan & China & southeast Asian countries. | |
 |
★The production possible size of SHELL★ Outside diameter Min-220mm, Max-1500mm Hole size Min-1.5mm, Max-15mm Shell length Min-1500mm, MAX-7500mm Hole processing uses the twist drill with the multiple drilling machine. |
| ★Type of suction hole★ | |||
| The suction hole is correspondence possible in STRAIGHT, COUNTERSUNK and SPOT FACING. The angle of COUNTERSUNK is 30 degrees or 18 degrees. | |||
|
Shell-Straight hole Pick-up,Felt(Transfer) |
|
Shell-Countersunk Couch |
|---|---|---|---|
|
Shell-Spot facing Cylinder,Forming |
|
Cover-Straight Pick-up Press,Press,Touch |
|
Cover-Countersunk Couch |
|
Cover-Straight&Blind drill Press,Touch |
| The material of Shell is the centrifugal casting stainless steel (13Cr or Duplex).
Our company, soft cover (Min:180 P&J) can be processed into a hole. After finishing hole, the inside diameter and outside diameter grinding.Therefore, no damage to internal seals and wire or felt. The material of Internal-BOX is the stainless steel or the steel (User selects). | |||
| | |||
| ★Type of SUCTION ROLL★ | |||
| Our company produces SUCTION ROLL of 4 types. All type "Suction position adjusting device" , "Suction angle adjusting device" and "Internal shower pipe" are included. «notes» Blue part is fixed, Gray part rotates, and Yellow area is a vacuum. | |||
 A.Standard type |
 B.Trunnion type with inside bearing | ||
 C.Trunnion type without inside bearing |
 D.Trunnion type with gear drive | ||
| | |||
| ★Catalog(Please click the image)★ | |||
| |||
| Catalog (PDF File 292KB) | |||
| | |||
| TOP | |||